FAQ

FAQ

What are our products?

The company's products cover motorcycle sprockets, motorcycle chains, 7075 aluminum alloy sprockets, etc.

After-sales service

If the buyer finds that there is a problem with the product after receiving the goods, please contact us in time and we will give a proper solution.

Product surface treatment

Our company can customize different surface treatments according to different customer requirements.

Product Size

Our products in strict accordance with the national standard size processing production

Manufacturer Products

The products produced by our company are all qualified products. Before cost packaging, they go through layers of checks and multiple inspections to ensure that the products delivered are all qualified products.

How is the product delivered to the customer's location?

1. Local customers can bring their own goods to our company. 2, on behalf of express delivery, on behalf of logistics; 3. Foreign customers negotiate the delivery and express delivery method.

What happened to the motorcycle chain?

The abnormal noise of the motorcycle chain may be due to the poor cooperation between the chain and the sprocket, and the pitch of the chain may be greater than the pitch of the sprocket. If this happens, there is no way to adjust, only the chain and sprocket of the motorcycle can be replaced.

Motorcycle chain eccentric wear

The outer side of the motorcycle chain is worn, which indicates that the chain has eccentric wear. The reason is because there is a problem with the adjustment of the front small sprocket and the rear sprocket, and the two sprockets are not in line.

Motorcycle change sprocket should pay attention to what?

The chain and sprocket of the motorcycle are the main transmission device of the motorcycle at this stage. During the normal riding process, the chain will stretch and the gear will be sharpened. When the chain and sprocket are worn, they need to be replaced in time. Otherwise, there will be drag chain, slipping, abnormal noise and other phenomena. The replacement of motorcycle chains and sprockets is also important. First of all, the chain and sprocket must be replaced at the same time, because they are in the same working condition. Only by replacing their gaps together can they be guaranteed to be normal, otherwise a single replacement will shorten the service life. Secondly, their wear resistance and tensile ability must be consistent, otherwise it will accelerate wear, and the best way to ensure the consistency of the two is to replace the chain, the chain manufacturing process and wear resistance will be better, equipped with chain and sprocket.

To what extent does the sprocket wear have to be replaced?

When checking the damage degree of the chain, we can check the tooth shape of the front and rear sprockets, because the shape of the tooth shape determines whether to replace it. Generally, the tooth shape of the normal new sprocket is complete and solid, and each gear that is ground It wears in the same direction, and the entire tooth shape is like a paper windmill that plays for an hour. The pointed teeth are constantly worn in the engagement with the chain, and eventually become smaller and smaller, and ultimately fail to guide the chain.
< 1 >